The APT Model 317 Needle Scaler Kit comes complete with the Model 307 Scaler and 3 chisels in a carrying case. The tool can be easily converted over from needles to a chisel in a matter of seconds.
TECHNICAL INFORMATION
| Specifications | |
| Blows per Minute | 4000 |
| CFM @ 90 psi | 7 |
| Weight (lbs) | 6.7 |
| Length (in) | 18 - 1/2" |
| Air Inlet NPT | 1/4 NPT FEMALE |
Air Pressure
The recommended air requirement for the operation of APT tools is 90 psi (6.2 bar). Lower air pressure will decrease power, too high a pressure will increase unwanted stresses in the tool. For proper CFM ratings, please refer to the specification charts shown for each tool in this catalog.
Hose Size
APT recommends the use of at least 1⁄2” inside diameter or larger hoses to assure sufficient air flow to the tool. For portable compressor hose and longer lengths, 3⁄4 “ hose is recommended. Keep the overall length of the hose to a minimum to prevent pressure loss at the tool.
Connecting Hoses
Hoses should be rated for a minimum of 250 psi (17.2 bar). Before connecting the air hose to the tool, check the tool inlet connector to be sure it is clean and free of dirt or debris. Keeping dirt and debris from entering the tool will assure long and satisfactory operation.