The Model 121 Mini Needle Scaler is a small, lightweight tool ideal for working in those 'hard to reach' places. Although compact, it delivers the 'punch' found in much larger scalers. It cleans irregular surfaces and removes rust, paint, and other coatings from metal. This tool is also versatile enough to peen welded joints and remove slag, as well as clean castings, chip stone, concrete, and brickwork.
TECHNICAL INFORMATION
| Part # | 18568 |
| Bore Diameter (in) | 0.70" |
| Stroke (in) | 1" |
| Blows per Minute (bpm) | 4,500 |
| CFM @ 90 psi | 5 |
| Weight (lbs) | 4 lbs |
| Length (in) | 11 - 3/4" |
| Air Inlet NPT | 1/4 NPT FEMALE |
Air Pressure
The recommended air requirement for the operation of APT tools is 90 psi (6.2 bar). Lower air pressure will decrease power, too high a pressure will increase unwanted stresses in the tool. For proper CFM ratings, please refer to the specification charts shown for each tool in this catalog.
Hose Size
APT recommends the use of at least 1⁄2” inside diameter or larger hoses to assure sufficient air flow to the tool. For portable compressor hose and longer lengths, 3⁄4 “ hose is recommended. Keep the overall length of the hose to a minimum to prevent pressure loss at the tool.
Connecting Hoses
Hoses should be rated for a minimum of 250 psi (17.2 bar). Before connecting the air hose to the tool, check the tool inlet connector to be sure it is clean and free of dirt or debris. Keeping dirt and debris from entering the tool will assure long and satisfactory operation.