The APT Model M633CN PG Handle Airgo-Line® Rivet Buster measures only 20 - 5/8" in length, delivering more power to those tight spaces. Weighing just 28 lbs, it's perfect for limited access work or whenever a compact, lightweight, and powerful tool fits the bill. The tool features an innovative cylinder design that reduces overall weight without compromising tool's strength or hitting force.

TECHNICAL INFORMATION

Model - Part #: Units M633CN PG - 18849
Bore Diameter in  1 - 3/16"
Stroke  in  6"
BPM  bpm 1,100
CFM @ 90 psistar w/neutral)  CFM  42 - 46
Weightstar w/neutral)  lbs  28
Lengthstar w/neutral)  in  21
Air Inlet NPTstar w/neutral)  in 1/2" NPT Female

STANDARD FEATURES

  • 6" Stroke
  • Drop forged, PG-style handle
  • Uses Jumbo extra heavy duty tool steel
  • Inside trigger for better control and safety
  • Deep case-hardened allow steel cylinder
  • Heavy duty upper and lower sleeves
  • Adjustable exhaust deflector
  • Teflon throttle valve

Air Pressure

The recommended air requirement for the operation of APT tools is 90 psi (6.2 bar). Lower air pressure will decrease power, too high a pressure will increase unwanted stresses in the tool. For proper CFM ratings, please refer to the specification charts shown for each tool in this catalog.

Hose Size

APT recommends the use of at least 1⁄2” inside diameter or larger hoses to assure sufficient air flow to the tool. For portable compressor hose and longer lengths, 3⁄4 “ hose is recommended. Keep the overall length of the hose to a minimum to prevent pressure loss at the tool.

Connecting Hoses

Hoses should be rated for a minimum of 250 psi (17.2 bar). Before connecting the air hose to the tool, check the tool inlet connector to be sure it is clean and free of dirt or debris. Keeping dirt and debris from entering the tool will assure long and satisfactory operation.